Installation Guide

4. LED Behaviors
Insert Power adapter and device will power up, there is a LED status:
 Location:
 Top right corner (Figure 5)
Figure 5
 Blinking Red - System update process
 Solid Red - System errors and can’t operation
 Solid Orange – System power on
 Solid Green – System power on and under connection
 Blinking Green – System power on and in idle mode
5. Connect with xCL_AT-150/xCL_AT-100
Place xCL_AT-150/xCL_AT-100 on the XC60 for charging and as Figure 6.
Figure 6