Installation Guide

4. USING THE MAGNETIC CARD READER
Swipe the card through the slot with magnetic stripe side facing the same direction as the
display. (Figure 3)
Figure 3
(Figure 3)
5. USING THE IC CARD READER
Insert an IC card into the slot (Figure 4) with the chip side facing the same direction as the
touch panel (Figure 5).
Figure 4 Figure 5
6. USING THE KEY PAD
After inserting the chip card, Press the numeric key as below keypad (Figure 6) to enter the
desirable numbers on touch panel. Press Cancel (X) key to terminate any current function and
press the Enter (O) key to confirm a value or an option.