Installation Guide

FRONT AREA
1 Printer Paper Cover
2 5” Display
3 Magnetic Strip Reader (MSR) slot
4 Power Button (Press > 3 seconds to power on/off)
5 Smart Card Reader (SCR) slot
REAR AREA
6 Charging contact points (Optional)
7 USB port (type C) for charging
8 Battery Compartment
■ AT-150 Power spec:
Input: 5V DC, 2A
■ Power Adapter spec:
Input: 100 ~240 Vac
Output: 5V DC, 2A
This symbol is intended to alert the user before starting using the POS.
Caution: Use only the AC adapter approved and provided by XAC Automation Corporation for
use with this device. Use of any other AC adapter may cause a risk of fire or explosion.
 Operating Temperature: 0
o
C to 40
o
C
3. POWER ON/OFF THE DEVICE
To power on the device: Long press the Power button (Figure 2) > 3 seconds and the device
screen will be activated.
To power off the device:
1) Press the Power button > 3 seconds to shut down the device.
2) No action on device after 30 minutes.
Figure 2
NOTE: When there is no action on AT-150 after 2mins (adjustable), the device will enter sleep
mode. Please short press power button to wake up the device.