User's Manual

3. SETTING CONNECTION

z USB interface:

Plug the USB connector into any of the USB port of the host.

z RS232 interface:

Connect the RS232 connector with the COM port of the host.

4. INSTALLING THE Battery

Install Battery: Insert battery into battery slot with POSITIVE (+) pole face downward.

Remove Battery: Pull the ejector (A). (Figure 7)

Figure 7



5. INSTALLING THE SAM CARD

Loosen the screw and open the SAM gate (Figure 8), insert the SAM-1(Figure 8-1)&

SAM-2(Figure 8-2) cards in the slot.