User's Manual

3. SETTING CONNECTION
z USB interface:
Plug the USB connector into any of the USB port of the host.
z
RS232 interface:
Connect the RS232 connector with the COM port of the host.


(Figure 5) (Figure 6) (Figure 7)
Connect plugs in Figure 5 and 6 as in Figure 7 until a click sound is
heard.
4. INSTALLING THE SAM CARD
Loosen the screw and open the SAM gate (Figure 8)at the back side of C150D,
insert the SAM card in the slot (Figure 9).
(Figure 8) (Figure 9)
