User's Manual

1. B EFORE S TARTING
On the top of xCE_E25C (also called xCE-25-C), there is a micro USB port and reset pin hole
(Figure 1) covered under the protection cover (Figure 2); this port is used for battery charging,
debugging, firmware update and key injection.
NOTE: The battery of xCE_E25C is built-in and rechargeable.
Figure 1 Figure 2
 Operating Temperature: 0
o
C to 40
o
C
 Battery Pack: 3.7V, 1050mAh
 Input: 5V, 500mA
2. P OWER O N /O FF THE D EVICE
Pressing the power button once, battery capacity will be displayed.
To power on the device, press and hold the Power key for five seconds until the buzzer sound
is heard, and screen is activated.
To power off the device, press and hold the Power key for five seconds until the buzzer sound
is heard, and screen becomes blank.
Figure 3
NOTE: xCE_E25C will power off itself automatically if unused for 5 minutes.
3. C ONNECTING TO S MART D EVICES
Once xCE_E25C is powered on, Bluetooth will be searchable. From the connecting device’s
Bluetooth settings, pair and connect to xCE_E25C.
4. U SING THE M AGNETIC C ARD R EADER
Find the magnetic card reader slot on the right side of the device (Figure 4). Swipe the card