CD-Player für Kinder
Inhalt 4 Chapter 1 Symbol explanation 4 Chapter 2 Intended use 5 Chapter 3 Safety instructions 7 Chapter 4 Delivery contents 7 Chapter 5 Technical Data 8 Chapter 6 The device 10 Chapter 7 Power supply 12 Chapter 8 12 12 12 12 13 13 13 13 14 14 15 General operating instructions On/Off Volume CD playback Selection of a specific track Fast forward and rewind Playback mode Repeat a single track Repeat all tracks Program playback Karaoke function Public announcements 1
Dear Customer, Thank you for purchasing this quality product. This instruction manual will give you a general idea how this product operates as well as providing you with information on cleaning and safety instructions. Please take your time to read and follow all safety and operating instructions in this manual carefully in order to maintain this products condition and ensure safe operation. Keep this manual and pass it with the product when distributed.
Symbol explanation 1-2 General warning sign, urges to attention and regarding general risks. It is used in conjunction with warning instructions or other symbols when non-observance can lead to harm of people or devices. 2. Intended use The X4-TECH BobbyJoey CD is designed to play audio-CDs in indoor environments. With the two included microphones the voices of your children can be amplified and output through the speakers – together with the music played.
2 Safety instructions 3 he following safety and danger references/notices serve not only the protecT tion of the product, but also the protection of your safety and health. Please read all following instructions carefully. • A void high volumes to protect your and your children’s hearing. High volumes may cause irreparable damage to children’s ears. • This device contains small parts and cables which can be swallowed. The device is not suitable for children under 3 years.
• T HIS CD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER, THIS CD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM, WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE. BE SURE TO OPERATE THE CD PLAYER CORRECTLY AS INSTRUCTED IN THIS MANUAL. • I NVISIBLE LASER RADIATION IS EMITTED WHEN THE COVER IS OPEN AND THE SECURITY INTERLOCK DEFEATED.
Delivery contents • X4-TECH BobbyJoey CD • Instruction manual 4-5 5. Technical Data Power Supply 4 x 1,5 V Type C-Batteries (Baby) (not included in delivery) AC adaptor 230V ~50 Hz / DC 6V, 600 mA (not included in delivery) Dimensions 265 x 225 x 100 mm (W x H x D) Weight approx.
The device 1 6 9 10 2 11 3 12 4 13 5 14 6 15 7 16 17 8 8 Chapter 6 The device
1 LED display 2 PROGRAM LED Programmed playback is running 3 OPEN Grip for sopening the CD door 4 15 HEADPHONE Headphone jack (on the rear left) 16 DC 6V 5W AC-DC connector (on the rear right) CD-Door 5 ON/OFF for microphone (on the microphone) 6 14 REPEAT Repeat modes 17 OFF.VOL On and off / Volume control Microphone 7 Battery compartment (on the rear of the device) 8 - MIC VOL + Microphone volume 9 PLAY/PAUSE Playback or pause mode 10 B.SKIP To the previous track 11 F.
Power supply a. Battery operation 7 Open the battery compartment by loosen the screw on the cover and remove the cover. Insert 4x 1.5 V Type-C Batteries (not included in delivery). Make sure to follow the polarity markings inside the battery compartment. • • • • • • • • • Never mix old and new batteries. Never mix rechargeable batteries with other types of batteries. Never mix different types of batteries. Always remove used batteries. Non-rechargeable batteries must not be recharged.
This device may only be connected to a 6 V, 5W AC/DC adaptor with negative pole at the inner conductor of the plug. The usage of other kinds of power adaptors may damage the device. Make sure the power supply plugs polarity corresponds with the input jacks on the device.
General operating instructions On/Off 8 Switch the unit on by turning the OFF.VOL-knop (see 6.17) clockwise. On the display (see 6.1) „- -„ will be displayed. To turn the unit off, turn the knob counter-clockwise until it snaps. The display will turn off. Volume Turn the OFF.VOL-knop (see 6.17) clockwise to raise the volume. Turn it counter-clockwise to lower the volume. CD playback 1. Switch the unit on by turning the OFF.VOL-knob (see 6.17) clockwise. 2. Open the CD door (see 6.
1. S elect the track in the playback, stop or pause mode with B.SKIP (see 6.10) or F.SKIP (see 6.11) and start the playback with PLAY/PAUSE (see 6.9). 2. Pressing briefly on F.SKIP (see 6.11) you can skip to the next track. Pressing this button repeatedly, you can skip several tracks until the desired track number is shown on the display. 3. Pressing briefly on B.SKIP (see 6.10) you will return to the beginning of the current track. 4. To skip back multiple tracks, press B.SKIP (see 6.10) repeatedly.
Program playback Up to 20 tracks can be programmed to be played in a specific order. 1. P ress PROGRAM (see 6.13) once while in playback or stop mode. „00“ on the display and also the Program-LED (see 6.2) will be flashing. 2. Select the desired track with B.SKIP (see 6.10) or F.SKIP (see 6.11). 3. Store the track with PROGRAM (see 6.13). The program number will be increased by one and shown on the display for a short period of time. 4. Repeat steps 2 and 3 to program up to 20 tracks. 5.
6. Now you can start singing into the microphone together with the music from CD. Take care that you don’t place the microphone too close to the speaker – otherwise an acoustic feedback (whistling from the speakers) can happen. Public announcements No CD necessary. Just talk into the microphone and the voice will be returned amplified by the device. 1. Just turn the device on by the OFF.VOL-knob without an inserted CD. 2. Slide the ON/OFF-button (see 6.5) on the microphone to the ON position. 3.
Maintenance and cleaning Cleaning the device 9 Pull the power plug before cleaning the device. Wipe the enclosure periodically with a duster. Never use chemicals or scrubbing agents for cleaning. If an optional power supply is used, the device must be disconnected from the power outlet before cleaning. Handling CDs Do not touch the playback side of discs. Hold by the edges without touching the recording surface, so that finger prints do not come in contact with discs.
ces must ste! disposal of ctions sites ment waste e informatintract your f the above on manual al unsorted ons and are se disposal well. Most he environhold waste. e place of sites.
11 Service For any enquiries please contact your local dealer or our service department. Service address: First Flash GmbH Lived – X4-TECH Donaustr. 20 D-38120 Braunschweig The content of this instruction manual can be changed without former notice. X4-TECH assumes no responsibility or liability for any errors or inaccuracies that may appear in this instruction manual. © 2012 X4-TECH All rights reserved.
1 19
Version 1.0 – 2/2012 www.x4-tech.
