User manual

19
Installation
DANGER! Disregarding can cause material damage.
Inappropriate placement can damage the product and its
components.
Considering the large number of different types of varnishes
and polishes used for furniture, it is possible that the device will
leave visible residue on the furniture as a result of a chemical
reaction. The product should therefore not be placed on the
surfaces of furniture without suitable protection.
WARNING! Warning risk of eye injuries caused by high light
intensity LED-lamps are extremely bright.
You must not, under any circumstances, look directly into the
emitted light as this may cause permanent damage to your
eyes. Never point the LED light directly towards other people or
animals.
DANGER! Risk of death by electric shock due to damaged
cable!
The product is powered by electric current. Therefore please
pay special attention to the following when handling the device:
» Cables must never be crushed, folded over, damaged by sharp
edges or subjected to any other kind of mechanical stress.
» Avoid exposing cables to excessive heat or cold.
DANGER! Risk of explosion!
» Batteries may explode when heated up.
» Never heat up the product or expose to open fire.
» Do not expose the device to mechanical impacts.
» Store the product away from water.
» Only use the USB-socket of a computer or the provided
USB-adapters to recharge the powerbank. Never use any
other kind of loading device.
WARNING! Epilepsy advice!
People suffering from photo-sensitive epilepsy, are
susceptible to epileptic seizures or loss of consciousness if
exposed to flashing lights or light patterns. If symptoms such
as dizziness, blurred vision, eye or muscle twitching, loss
of awareness, disorientation, any involuntary movement or
convulsion should occur, the light effect should be switched off
or the person should leave the room/place.
Defective safety glass has to be replaced immediately; the
product must not be used with defective safety glass.
Cleaning and maintenance
Always use a soft, dry and lint-free cloth to clean the unit’s
exterior. If the device is extremely dirty you can use a soft clo-
th, dampened with water or a mild cleaning solution to clean.
Never use any abrasive or harsh cleaning agents (e.g. alcohol,
petrol or thinners) as these could damage the controls, casing,
accessories or any markings and labels found on the device.
DANGER! Short-circuit hazard! A short-circuit could be
caused if moisture enters the product.
» Never immerse the product into water.
» Take care that no liquids enter the casing of the product.
DEUTSCHENGLISCHFRANZÖSISCH