User manual

30
Location
DANGER
Disregarding can cause material damage. Inappropriate
placement can damage the product and its components.
Setting up the product improperly can damage it and its components.
• Set up the product either in the open air or with a sucient ventilation opening
of at least 10 cm.
• The distance between the light source and the illuminated area has to be larger
than 0,5 m.
• Do not block any of the product's ventilation openings.
• Do not drill or screw any additional screws in the housing to fasten the product.
Make sure that there are no high‐powered transformers or motors in the vicinity
of the product.
• Considering the large number of dierent types of varnishes and polishes used
for furniture, it is possible that the device's feet will leave visible residue on the
furniture as a result of a chemical reaction. The product should therefore not be
placed on the surfaces of furniture without suitable protection.