GB Construction Light USER MANUAL Art.-Nr.
Content Information on this user manual ...................................22 Liability ..........................................................................22 Designated use...............................................................22 General notes..................................................................23 Service.............................................................................24 Importer..........................................................................24 Signal Words.
User Manual | Construction Light | ENGLISH We are pleased that you have decided to buy our product and wish you an enjoyable and successful use. Information on this user manual This user manual contains important information for the safe use of the product. Therefore, for your own safety and for a successful use, please read this user manual completely before assembling and using the product. Please keep this operating manual for reference.
suitable for indoor usage and adequate protection is recommended. The designated use is defined by the instruction manual and in following the appliance and the warnings mentioned in this user manual. This product is not suitable for commercial usage. General notes All mentioned company and product names are registered trademarks under the rights of their owners. © All rights reserved.
Service Service address lived non food GmbH TOR 8 – 9 Donaustraße 20 D-38120 Braunschweig Phone +49 (0) 531 224356-82 E-Mail service@x4-life.de Internet www.x4-life.de Importer 24 Address lived non food GmbH Donaustraße 20 D-38120 Braunschweig E-Mail info@lived-non-food.de Internet www.lived-non-food.
Signal Words Danger High risk! Disregard of this regulation may result in danger to life or physical condition. Warning Medium risk! Disregard of this regulation may cause material damage. Caution Low or no risk! Facts to follow for the designated use of this product.
Safety guide Please read the safety guide before using the product. This information is for your safety and the protection of the device and devices connected. You will also find specific safety instructions in the following chapters of this user manual. Danger High risk for children and other groups of people! Inappropriate handling may lead to injuries or material damage. This product is not a toy and should not be handled by infants and small children.
Warning Warning risk of eye injuries caused by high light intensity LED-lamps are extremely bright. You must not, under any circumstances, look directly into the emitted light as this may cause permanent damage to your eyes. Never point the LED light directly towards other people or animals. Warning Warning risk of electric shock! Faulty electrical installation or too high current can lead to electric shock.
• Never use a defective or modified charging cable. • The device must not be charged for more than 24 hours straight. • Repairs are only to be carried out by qualified personnel which is familiar with the hazards involved and the relevant regulations. Only original spare parts may be used. • Should there be doubt when using the device or should questions arise that are not explained in this manual, please contact a service technican or the manufacturer. Warning Misuse may cause risk of damage.
from the cold to a warm area (e.g., during transport), condensation can occur within the unit. Let the device reach room temperature, before you use it. The product may not be subjected to extreme heat or cold. Do not expose the product to intense sunlight, open fire or other heat sources: Storage temperature: -0°C to 40°C; Working temperature: 0°C to 40°C This device is equipped with an integrated lithium ion battery. Batteries and rechargeable batteries must be kept out of the reach of children.
Location Danger Disregarding can cause material damage. Inappropriate placement can damage the product and its components. Setting up the product improperly can damage it and its components. • Set up the product either in the open air or with a sufficient ventilation opening of at least 10 cm. • The distance between the light source and the illuminated area has to be larger than 0,5 m. • Do not block any of the product's ventilation openings.
Tripping hazard caused by stumbling! Route the cables in a way that ensures people cannot stumble over it. Never place the device in a way it may represent a tripping hazard. Consider the location of the device! Always place the product on a flat surface. Vibration resistance! This product allows the usage at normal or higher vibrations which are produced during faster walking or driving. Cleaning and maintenance Danger Always use a soft, dry and lint-free cloth to clean the unit’s exterior.
Specifications 32 Protection class IP65 LED-Type High Power EPISTAR Chip Performance 10 Watt Radiation angle 120° Light flux Up to 900 Lm Light color Cold white Color temperature 6000 – 6500 K Working temperature -20 °C bis +40 °C Tª 25°C Tc 40°C Energy efficiency category A+ kwh/1000h 10 Charging time Up to 6 hours Runtime 3 – 6 hours
Li-Ion rechargeable battery Lithium ion battery Charging voltage 8.4 V; 1 A (DC) Starting time 0.01 s Rated LED lifetime 30.000 h Lifetime 500 charging cycles Dimensions 135 x 240 x 165 mm Weight 1.
Getting started 1 9 2 3 10 11 7 4 34 8 5 6
1. Handle 2. Fixing screw 3. Retaining bracket 4. Base 5. On/off/dimm-switch 6. Charging socket with cover 7. LED function display 8. Screw for retaining bracket 9. Charging cable 12 V/24 V 10. Power adaptor 11.
Setting up the device 1. Unpack all parts from the packaging. 2. Connect the retaining bracket (3) with the base (4) using the screw (8). Place the washer (11) between the retaining bracket (3) and the base (4). Insert the screw downwards through the retaining bracket (3) and the base (4) and tighten the screw. 3. The integrated battery has to be charged now. You can use the power adaptor (10) or the recharger cable 12 V/24 V (9) for charging.
Dimming function Switch the switch (5) to ON (I) to turn on the device. To reduce the brightness to 75 %, switch the switch (5) off (0) and on (I) again within 2 seconds. This procedure can be repeated for a brightness of 50%. Repeated once more, the brightness will be set to 100 % again.
• Fully charge the battery before storage and every 6 months when the product is not in usage. • The charging electronics stops when the integrated battery is full to prevent overcharging. • The battery must never be charged more than 24 hours straight. • Normal charging time: 6 hours Advice on the lifetime of batteries It is advisable to let the battery go fully flat from time to time and then recharge it again to full capacity for several hours. This refreshes the battery.
Disposal Electrical- and electronic devices must never be disposed of in the regular household waste! Consumers are legally obligated and responsible for the proper disposal of electronic and electrical devices by returning them to collecting sites designated for the recycling of electrical and electronic equipment waste. For more information concerning disposal sites, please contact your local authority or waste management company.
12.
