User's Manual

USER MANUAL
XORAYASUITE
76
The filter is executed in two successive steps:
 Pre-filter MAC address
 Queue dispatching filter EtherType and VLAN
Configure pre-filters:
 Click Add pre-filter (1).
 Choose the Filter type (only MAC is available at the current
development stage).
 Under Direction, choose if the filter applies to a participant who is
Source and/or Target.
 Under Operator, choose if the filter is added to the whitelist (==) or the
blacklist (!=).
 Specify the MAC address.
 Click Save pre-filter (3).
 Repeat as necessary for further pre-filters.
Priorities of pre-filters
Change the priorities of the pre-filters with the buttons
(4) and (5).
The X
ORAYASuite applies the first pre-filter from the top
that matches the condition. The other pre-filters are
ignored.
The ML-N4000 processes packet data in Online mode and HDD mode via the
so-called default-queue. In the stream-queue, only HDD mode recording is
possible, and streaming data are directly stored without creating statistics.
The queue dispatching filter compares EtherType and both VLAN tags
(InnerTag, OuterTag) of received Ethernet frames with the bytes specified
here. ( Set bits)
If all selected filter conditions are matched, the Ethernet frame is assigned
to the streaming data, otherwise to the packet data. If the Ethernet frame
contains no or only one VLAN tag, the filter conditions for the non-existing
fields are ignored.
Via Load presets, you can configure filter conditions in such way that either
all frames are assigned to streaming data (Streaming logging only) or all
frames to packet data (Packet logging only).