User's Manual

USER MANUAL
PRODUCT DESCRIPTION
26
Log interfaces (N):
The slots can be variably equipped with up to five interfaces.
Slot and channel number of each hardware interface are also displayed in
multiple locations of the X
ORAYASuite tool Configuration:
( Interface configuration)
 Main overview for all interfaces
 Main overview for all channels of one interface type
 Settings for the corresponding interface channel
Pin assignments can be found in the relevant section.
( ML-N4000 pin assignments)
BroadR-Reach/Base-T1 interface (O):
The housing label OABR stands for OPEN Alliance BroadR-Reach®.
This interface is not part of the log interface slot system (N) but
implemented as an add-on board.
LIN power supply internal/external (P):
Use the internal power supply of the LIN measurement card only if the
connected LIN device uses the Minilogger Z7 voltage as a reference voltage.
Bear in mind that this is not possible when using the Minilogger Z7 in a 24-V
electrical system, for example. In this case, connect the external power
supply port to the corresponding reference voltage.