User's Manual

7
• Make sure that the power cable is
connected correctly.
• Make sure that the power supply at the
power source is working correctly.
• With the chair turned to the ON posion,
give the power cable a slight wiggle in the
port. If any lights icker (or not)
then please contact support (details below).
• Review the connecon methods on
the previous page and try alternave
connecon methods if possible.
• Conrm that the device/system is
correctly congured as per previous
connecon guide.
• Make sure that the Bluetooth switcher
is in the corresponding posion that suits
your connecon method. (B for and AUX
for wired connecons).”
• Please make sure that the volume of
the source device is at a higher level to
strengthen the audio signal.
• Please contact X Rocker support
(service@XRockerNaon.co.uk) regarding
this issue.
• In this case, try another of the three
wireless bands to isolate the signal.
Troubleshoong ps
No power going to control panel
Issue Troubleshoong steps
No sound
Bluetooth mode cuts out during
gameplay/No vibraon or subwoofer
sound via analogue connecon
The cables connected to my
X Rocker have been broken
accidentally
Interference over wireless connecon