Datasheet

SpectroEye LT SpectroEye Options
Measurement
Functions
Colorimetry CIE L*a*b*, CIE L*C*h (a*b*),
ΔE*CIELAB
CIE L*a*b*, CIE L*C*h (a*b*),
ΔE*CIELAB
CIE XYZ, CIE xyY; CIE L*u*v*, CIE L*C*h
(u*v*), ΔECIELUV;LABmg,LCHmg,ΔEmg;
Hunter Lab, ΔE Hunter Lab; RxRyRz
Special color deviation formulas optional ΔE*2000, ΔE*94,ΔE CMC, ΔE FMCII, Metamerism
Densitometry Density,Alldensities(GreyBalance),
Dot gain, Dot area, Trapping, Contrast,
Print characteristic, Auto Function
Density,Alldensities(GreyBalance),
Dot gain, Dot area, Trapping, Contrast,
Print characteristic, Auto Function
Printing plate, Greyness, Hue error
Spectrum optional Reflection spectrum Density spectrum
Special functions optional BestMatch
Color guides optional PANTONE
®
Formula Guide (coated,
uncoated, matte) and PANTONE Goe
libraries (coated, uncoated)
DIC Color Guide; HKS E, K, N and Z
Dye Strength optional optional Absolute (K/S) and relative (K/S)
White- and Yellowness optional optional Whiteness CIE, Whiteness ASTM E313,
WhitenessBerger,WhitenessStensby,,ISO
BrightnessR457,YellownessASTME313,
YellownessASTMD1925,TintCIE
Security optional optional Setting protection, Multi user
Software
KeyWizard included included
NetProfiler 2 optional
Color Quality Basicversionincl.,Fullversionoptional
InkFormulation optional
Measurement
Conditions
White base Absolute, relative
Illumination types D50, D65, A, C, D30…D300, F1…F12
Standard observers 2°, 10°
Density standards ISOStatusA,ISOStatusE,ISOStatusI,ISOStatusT,DIN16536,DIN16536NB,
Measurement
Technology
Spectral analysis Holographic diffraction grating
Spectral range 380nm to 730nm
Physical resolution 10nm(internalresolution:3.3nm)
Measurement geometry 45°/0° ring optic, DIN 5033
Measurement aperture 4.5mm or 3.2 mm (selectable upon order)
Light source Gas-filled tungsten, type A illumination
Physical filters No (incandescent lamp light), Polarized, D65 (Approximated daylight), Optional UV cutoff
Measurement time Approximately 1.5 sec
Measurement range DensityDIN16536:0.0D–2.5D
Inter-instrument agreement Typical 0.3 ΔE*CIELAB,or0.15ΔECMC(2:1)averagebasedon12BCRAtiles(D50,2°)
Linearity ± 0.01D
Short-term repeatability 0.02 ΔE*CIELAB(D50,2°),meanvalueof10measurementsevery10secondson
Density repeatability DensityDIN16536(Repeatability±0.01D):
No Filter 0.0D–2.5D, Yellow 0.0D–2.0D
Pol Filter 0.0D–2.2D, Yellow 0.0 D–1.8D
Filter wheel Electronic selection of filter
White calibration Automatic on integrated white tile
Instrument check Automatic check of the spectral calibration
Density filter recognition Manual and automatic
Average Averaging for multiple measurement values
Color detection Manual and automatic assignment of samples to references
Data Interface
Serial data interface RS232CwithBaudrate:300to57,600
Power Supply
Power supply NiMH battery pack, nom. 7.2V, 1300 mAh
AC adapter requirements 85 VAC to 270 VAC, 47 Hz to 63 Hz
Charge time Approximately 3 hours, automatic disconnection
Charge status Automatic capacity checking and display
Measurements per charge Approximately 3000
Mechanical Data
Physical dimensions 24.5cmlength,8.3cmwidth,8cmheight(9.6x3.3x3.2in)
Weight Approximately990g,(2.18lb)
Functions and Technical Specifications
white
SPI
© 2008, X-Rite, Incorporated. All rights reserved.
www.xrite.com
L7-423 (10/08)
SpectroEye