Instruction manual

S P 6 0 S E R I E S
S P H E R E S P E C T R O P H O T O M E T E R
13
Using the Instrument
Opening a Mode or Menu
Opening a mode or menu allows you access to additional items
related to the menu or specific information for a mode. Below
are examples of typical mode and menu screens.
To open a mode or menu:
1. Use the Tab Up key $ or Tab Down key @ to highlight the
desired mode or menu item.
2. Press the Enter # key.
Selecting Color Data Parameters
Measured data can be viewed under varying illuminant
observer conditions, specular component (included or
excluded) and color space/indices. The active color
space/indices and illum/obs are defined in the Instrument
Configuration. The color data immediately changes to reflect
the selected parameter.
To select a parameter:
1. Use the Tab keys $ @ to highlight the desired parameter.
2. Press the Enter key # to page though the available
parameters.
SPIN (Specular-Included)
SPEX (Specular-Excluded)
A/2, A/10, C/2,
C/10, D50/2, etc.
L*C*h°, XYZ, Lab
(Hunter), etc.
Selecting the curve activates
the reflectance graph
Proj 1: Cartons
Std 1: Red Sample
Sample: #10 11:23
L*a*b*
D65/10
SPIN
.
.
.
.
.
.
.
.
.
.
∆L* +0.05
L* 88.25 ∆a* —0.03
a* —4.71 ∆b* —0.14
b*+36.64 ∆E* 0.16
CONFIGURATION
Language :English
Measure Options...
Color Options...
Database Tools...
Hardware Setup...
Configuration Menu
Proj 1: Cartons
Std 1: Red Sample
Sample: #10 11:23
L*a*b*
D65/10
SPIN
.
.
.
.
.
.
.
.
.
.
∆L* +0.05
L* 88.25 ∆a* —0.03
a* —4.71 ∆b* —0.14
b*+36.64 ∆E* 0.16
QA Mode