User guide

PLATESCOPE
16
Plate Setting
This screen is used to select the plate type that the instrument will be measuring.
To select the plate:
1. From the Configuration screen, use the Navigation Ring to move the highlight focus to the
Plate Setting icon.
2. Press the Select button.
3. Use the Navigation Ring to move the highlight focus to the desired plate icon. Additional
plates not displayed are accessed by continually pressing on the bottom or top of the
Navigation Ring.
4. Press the Select button to select your plate setting. A checkmark appears next to the selected
plate.
5. Press the right side of the Navigation Ring to quickly move the highlight focus to the Exit
icon.
6. Press the Select button to exit back to the previous screen.
Exit
Scroll bar indicates
additional plate
selections are available
Plate selected
Plate database version number