User guide

PLATESCOPE
15
Units Setting
This screen is used to set the displayed units. The setting can be set to inches (in) or centimeters
(cm).
To adjust the units:
1. From the Configuration screen, use the Navigation Ring to move the highlight focus to the
Units Setting icon.
2. Press the Select button.
3. Use the Navigation Ring to move the highlight focus to in, or cm icon.
4. Press the Select button to change your setting. A checkmark appears next to the selected
setting.
5. Press the right side of the Navigation Ring to quickly move the highlight focus to the Exit
icon.
6. Press the Select button to exit back to the previous screen.
Exit
Inches
Centimeters