User guide

i1iSis Optical Brightener Compensation (OBC) Module - User Guide

To print the chart in Photoshop CS3 select File > Print; to print 4.

the chart in Photoshop CS2 select File > Print with Preview.

Do not scale the image in Photoshop. It must be printed in its original size or the i1iSis will not 5.

be able to properly read the target.

Select the proper paper size in the Page Setup dialog box.6.

Select the proper paper size in the Page Setup dialog box.

Turn off the color management in Photoshop CS2 or CS3 by selecting “Same as Source” in 7.

the Profile pull-down menu. In CS2 and CS3, select “No Color Management” under the Color

Handling pull-down.

In the printer’s driver settings, make sure that all color management is turned off. This includes 8.

all automatic color settings, color matching options and manual color controls. Also make sure

to select your media type; if yours is not listed, select the one that most closely represents your

substrate.

Make sure that you document the print settings in the printer’s driver. You will need to use them 9.

when you print with the new ICC profile.

If you have the choice between a CMYK or an RGB workflow, please choose CMYK. The achiev-

able profile quality is higher using CMYK. Please note that some printer drivers won’t allow the

user to completely deactivate their color management functions. If this occurs, try using a differ-

ent printer driver.