User guide

i1iSis Optical Brightener Compensation (OBC) Module - User Guide
10
Click the right arrow key when i1iSis has completed reading the test chart. 3.
Click the right arrow key when i1iSis has completed reading the test chart.
Select the Gloss Level of the media you are printing on and press the save button. 4.
Select the destination and name that you want to use to save your Gray Evaluation Chart. 5.
Select the destination and name that you want to use to save your Gray Evaluation Chart.
Once the Gray Evaluation Chart has been saved, locate the file on your computer and open 6.
the file in Adobe Photoshop, making sure to select “Leave as is (don’t color manage)”.
i
Please note that i1iSis will indicate its status with its LED. Wait until the LED flashes green before
you insert the test chart. Please also note that the OBC Module will try to measure a test chart
again if the test chart is not fully removed from the device after the measurement cycle is com-
pleted.
i
Please note that for substrates containing no optical brightening agents, the OBC module will
allow you to skip the Grey Evaluation Chart process and proceed directly with saving the mea-
surement data. For a substrate without OBAs, the NoFilter and the UVcut filter measurement will
come to the same results.