manual

9
6. Test of repeatability
To test the qualification of the device for the NetProfiler, a repeatability test before
each certification / profiling has to be arranged. For this 10 measurements are
necessary, each one on the white and the blue area.
The average of the color distance of this measurement mustn’t exceed a
compulsory value. Is it the case anyhow, it would be possible to continue the
measurement act, but the certification will always fail.
The device needs to be checked by a service branch. In this case it will not
charge you a license.
7. Effect of the temperature
After the passed repeatability measurement the input of the current ambient
temperature follows.
Please enter here the real temperature, as in the field of 18 – 28°C a difference of
0.1°C leads to an irregularity of 0.1 dE. The value of the temperature will be
charged with the measurement data for the profile creation.
Please profile the device only in an area which fits to the specification of the
instrument.