manual

18
15. NetProfiler in the device
To use NetProfiler with the SpectroEye you have to have at least Firmware 1.70
in the device. You can check the Firmware-Version as following:
Main menu > Settings > General > Type data’s
The new Firmware you’ll find on our website, section SpectroEye:
(http://www.xrite.com/product_overview.aspx?ID=764&Action=support&SoftwareID=826)
and may be downloaded to the device with the software GretagMacbeth
Download Utility.
Indication of the NetProfiler adjustment
When you run the profiling of your device for the first time, the profile will be
activated automatically. The symbol "#" in the folder Special-Icon Measurement
conditions shows that the profile is activated:
Profile active Profile active but expired NetProfiler Off