User`s manual

Settings: General

1. Menu: → „Settings“ → „General“

a. Standard measuring conditions: normally analog like the display below

whereas under the file „Filter“ there has to be taken a choice only by

creating a new assortment. Apart from that the program requires

automatically the filter with which the current loaded assortment was

created.

b. Color system: Here you can always switch between „CIE-Lab“ and „CIE-

LCh“. The values are shown accordingly in the main window.

c. Illuminant for metamerism: With above mentioned settings possible

metamerism is shown under „warm“ (yellowish, „A“) and „cold“ (bluish

with parts of UV, F11) light. This is a usual setting.

d. Averaging: for homogen color films one measurement may be sufficient. If

the color film is broken or turbulent we recommend 2, 3 or more

measurements.

2. Click on „Cancel“ to close the window.