Specifications

6 • Calculating a correction recipe
59
Calculating a correction recipe
6.1 General
If the mix of a basic recipe does not meet your requirements, you can
calculate a correction recipe basing on the measurement of the current
ink mixture and so achieve a better match with the target color.
Selection between the Basic recipe mode and Addition mode can be
made with the menu command Settings > Formulation (
see Section
23.2 “Formulation settings”).
- If the Basic recipe mode is selected, an improved basic recipe
is displayed for recipe output in the main window.
- If the Addition mode is selected, the ink quantities for the basic recipe
and additional ink are displayed separately in the main window.
6.2 Correction recipe
1. Click on the Correction recipe symbol or on Correction recipe
in the Formulate menu.
2. Defi ne the current ink mixture, provided this has not already been
defi ned earlier (
see Section 5.9 “Measure current ink mixture”).
In every case, the colorants contained in the basic recipe will be used
in the correction recipe.
3. Correct the list of colorants selected (
see Section 5.2.6 “Selecting
colorants from the assortment”) and then click on OK.
Proceed in the same way as for defining a target color (
see
Section 5.2.3 “Defi ning a target color”).
4. Select the desired application.
The correction recipe is then calculated.
6