Specifications

5 • Formulating a target color
47
5. Click OK if the recipe displayed in the Recipe list fi eld meets your
requirements. The full recipe is then displayed the main window.
The right-hand side of the main window displays the target color (pattern),
together with the color values and the recipe color, plus the deviations
from the target color. The color values and deviations are displayed
in accordance with the selected color system (
see Section 23.1
“General settings”).
The metamerism values M1 and M2 in the lower area of the window are
displayed for the illuminants selected (
see Section 23.1 “General
settings”).
The Recipe list fi eld displays the recipe with the used components and
the percentage.
Accordingly to the selected recipe output you get different color
patches:
Basic material mode
Basic inks and solvent mode
Print ready inks mode
Using the recipe output basic inks and solvent or basic material the amount
of solvent is displayed excluded:
If you want to display a different recipe which has been calculated, click
on in the Recipe selection button or on Further recipes in the Recipe
menu. You can then select the desired recipe from the Recipe selection
window.
By clicking on the pushbuttons with the arrow symbols in the Recipe
selection button, you can display the next recipe up or down in the
list of the calculated recipes immediately (
see section 3.2.1 “Main
window”).
A further way of assessing a recipe is to compare the spectra of the target
color and the recipe (
see Section 5.2.10 “Displaying spectra”).
You can subsequently change the entries displayed in the Film thickness
and Viscosity fi elds (
see Section 5.4 “Changing the fi lm thickness or
viscosity of a recipe”).