Technical data

Settings

............................

5.7.1 – 5.7.2

• Activate the selected function by pressing the <Measurement key>.

• Select the desired type of printer or PC by turning the <Control ball> and confirm the selection by

pressing the <Measurement key>.

• Select the menu line Return and press the <Measurement key> several times to return to the main

menu.

5.7.2 Printer protocol

........................................................................................................................................

The Printer protocol function allows you to carry out the following settings:

........................................................................................................................................

• D190 protocol for complete and good looking print-outs of the measuring results.

• D180 protocol is fully compatible to that of the D180 densitometer.

Procedure:

• Select the menu line Settings by turning the <Control ball> and confirm the selection by pressing

the <Measurement key>.

• Select the menu line Printer by turning the <Control ball> and confirm the selection by pressing the

<Measurement key>.

• Select the menu line Printer protocol by turning the <Control ball> and confirm the selection by

pressing the <Measurement key>.