Technical data

Settings

............................

5.6.4

5.6.4 Calibration with absolute white base

Procedure:

........................................................................................................................................

Select absolute white base under Settings k Measurement parameters k White base.

........................................................................................................................................

• Select the menu line Calibration by turning the <Control ball> and confirm the selection by pressing

the <Measurement key>.

• Select the menu line New calibration by turning the <Control ball>.

• Activate the selected function by pressing the <Measurement key>.

• The entry field for the White-offset values is shown on the display.

• Press the <Measurement key> to get into the entry field for the white-offset value of the color

Black.

• Enter the white-offset value for the color Black by turning the <Control ball> and terminate the entry

by pressing the <Measurement key>.

• Enter the white-offset values for the colors Cyan, Magenta and Yellow.

• After the white-offset value for the color Yellow has been entered, the graphics bar will jump to the

menu line Accept data.

• Store the white-offset values by pressing the <Measurement key>.

• • • • •