Technical data

Settings

............................

5.5.5 – 5.5.5.2

5.5.5 Measurement parameters for dot area

........................................................................................................................................

Selection of the desired formula for the dot area calculation according to Murray- Davies or

Yule-Nielsen and entry of the Yule-Nielsen coefficients for Black, Cyan, Magenta and Yellow.

........................................................................................................................................

Usually the formula of Murray-Davies is in use. You have to select the formula of Yule-Nielsen

if you want to measure the geometrical dot area.

........................................................................................................................................

5.5.5.1 Setting for dot area calculation according to Murray-Davies

Procedure:

• Select the menu line Dot area by turning the <Control ball> and confirm the selection by pressing

the <Measurement key>.

• Select the menu line Murray-Davies by turning the <Control ball> and confirm the function by

pressing the <Measurement key>.

• Select the menu line Return with the <Control ball>.

• Press the <Measurement key> several times to return to the main menu.

5.5.5.2 Setting for dot area calculation according to Yule-Nielsen

Procedure:

• Select the menu line Dot area by turning the <Control ball> and confirm the selection by pressing

the <Measurement key>.

• Select the menu line Yule-Nielsen by turning the <Control ball> and confirm the function by

pressing the <Measurement key>.

• Select the menu line Y-N coefficients with the <Control ball> and confirm the function by pressing

the <Measurement key>.