Technical data

Settings

............................

5.5.4 – 5.5.4.1

5.5.4 Measurement parameters for print characteristic

........................................................................................................................................

Entry of the halftone step wedge graduation in the range between 5% and 99%.

Presetting for the numerical or graphic representation of the print characteristic.

........................................................................................................................................

5.5.4.1 Entry of scale graduation

Procedure:

• Select the menu line Print characteristic by turning the <Control ball> and confirm the selection by

pressing the <Measurement key>.

• Select the menu line Scale graduation by turning the <Control ball> and confirm the selection by

pressing the <Measurement key>.

• Press the <Measurement key>; the entry field for the scale graduation is shown in reverse video on

the display.

• Enter the desired scale graduation with the <Control ball>.

• Terminate the entry by pressing the <Measurement key>.

• Select the menu line Return with the <Control ball>.

• Press the <Measurement key> several times to return to the main menu.