Technical data

Settings

............................

5.5.3 – 5.5.3.1

5.5.3 Measurement parameters for dot gain

........................................................................................................................................

One to three halftone reference values in the range between 0% and 100% can be entered. At

the upper and lower ends of this range, the selected halftone values can be switched off. This

will be confirmed with <off> on the display.

........................................................................................................................................

5.5.3.1 Entry of halftone reference values

Procedure:

• Select the menu line Dot gain by turning the <Control ball>.

• Activate the selected function by pressing the <Measurement key>.

• An entry field for three halftone percentages is shown on the display.

• Select the menu line 1.Screen percent and confirm the selection by pressing the <Measurement

key>.

• The entry field for the 1st halftone reference value is shown on the display.

• Enter the 1st halftone reference value by turning the <Control ball> and confirm the entry by

pressing the <Measurement key>.

• Select the menu line 2.Screen percent and confirm the selection by pressing the <Measurement

key>.

• The entry field for the 2nd halftone reference value is shown on the display.

• Enter the 2nd halftone reference value by turning the <Control ball> and confirm the entry by

pressing the <Measurement key>.