Technical data

5
Settings
............................
5.5 – 5.5.1.1
5.5 Measurement parameters
5.5.1 Overview
In the menu Measurement parameters, the following settings can be made:
• Selection of paper white or absolute white as white base.
• Entry of one to three halftone reference values for dot gain measurements.
• Entry of the halftone wedge gradation and the presetting for numerical or graphic representation of
the print characteristic.
• Selection of the desired formula for the calculation of the dot area according to Murray-Davies or
Yule-Nielsen as well as the entry of the Yule-Nielsen coefficients for Black, Cyan, Magenta and
Yellow.
• Entry of the Yule-Nielsen coefficient for the calculation of the dot area of printing plate.
5.5.1.1 Function selection
Procedure:
• Select the menu line Settings by turning the <Control ball> and confirm the selection by pressing
the <Measurement key>.
• Select the menu line Measurement parameters by turning the <Control ball> and confirm the
selection by pressing the <Measurement key>.
• Select the desired menu line by turning the <Control ball>.
• Activate the selected function by pressing the <Measurement key>.