Technical data

Settings

............................

5.4.5

5.4.5 Reference entry

Procedure:

• Select the menu line Reference entry by turning the <Control ball> and confirm the selection by

pressing the <Measurement key>.

• Activate the function by pressing the <Measurement key>.

• The display shows Measure paper white in reverse video.

• Position the measuring aperture on the paper white and initiate a measurement by pressing the

<Measurement key>.

• The display White measurement done is shown for about 1 second.

• The display shows Measure color in reverse video.

• Position the measuring aperture on the color samples Black, Cyan, Magenta and Yellow, and initiate

the measurements by pressing the <Measurement key>.

• If more than four references have been defined for this job, a table with a proposal for the

assignment of the reference will be shown in reverse video after every measurement.

• Select the respective reference by turning the <Control ball> and confirm the selection by pressing

the <Measurement key>.