Technical data

Settings
............................
5.4.3
5.4.3 Entry or correction of reference and tolerance values
........................................................................................................................................
After entering reference or tolerance values, the current values are indicated in the respective
entry fields.
........................................................................................................................................
Procedure:
• Select the menu line References by turning the <Control ball> and confirm the selection by pressing
the <Measurement key>.
• The display shows Reference input in reverse video.
• Activate the function by pressing the <Measurement key>.
• The display shows Measure paper white in reverse video.
• Select the menu line of the desired color by turning the <Control ball> and press the <Measurement
key>.
• The entry field for the entering or correction of the reference value appears in reverse video on the
display.
• Enter the new reference value or correct the current value and terminate the entry by pressing the
<Measurement key>.
• The entry field for the entering or correction of the tolerance value is shown in reverse video on the
display.
• Enter the new tolerance value or correct the current value and terminate the entry by pressing the
<Measurement key>.
• The display shows the menu line with the newly entered values in reverse video.