Technical data

5
Settings
............................
5.3.1 – 5.3.1.1
• Delete the current job name by repeatedly pressing the <Measurement key>.
• Enter the new job name with the <Control ball>.
• Select the menu line OK with the <Control ball> and press the <Measurement key>.
• The display shows <off> in reverse video, i.e. the reference with the name GRETAG-01 is switched
off.
• Enter the number of reference values you wish to store under the name GRETAG-01. Four to eight
reference values can be stored.
• Terminate the entry by pressing the <Measurement key>.
5.3.1.1 Accept data
Procedure:
• Select the menu line Accept data by turning the <Control ball> and confirm this action by pressing
the <Measurement key>.
The new data are stored.
• The menu line Return is shown in reverse video on the display.
• Press the <Measurement key> several times to return to the main menu.
........................................................................................................................................
Job1 cannot be switched off
........................................................................................................................................