Technical data

Settings

............................

5.1.1.2

5.1.1.2 Function selection if the settings are protected

Procedure:

• Select the menu line Settings by turning the <Control ball> and confirm the selection by pressing

the <Measurement key>.

• Press the <Measurement key> again for entering the password.

• Select the characters of the password by turning the <Control ball> and confirm the selections by

pressing the <Measurement key>.

• After entering the password select the menu line OK by turning the <Control ball> and confirm the

selection by pressing the <Measurement key>.

• You are in the menu Settings now.

• Select the desired menu line by turning the <Control ball> and confirm the selection by pressing the

<Measurement key>.

Wrong password

• If the password is not correct, the display Password wrong will be shown and you cannot enter

into the menu Settings.