Technical data

Settings

............................

5.1 – 5.1.1

5.1 Overview

The following functions can be selected:

• Color

Manual color selection and automatic color recognitio

• Jobs

Definition and selection of jobs

• References

Measurement or entering of reference and tolerance value

• Measurement parameters

White base

- Dot gain

- Print characteristic

- Dot area

- Printing plate

• Calibration

Paper white calibration

- Absolute white calibration

- Check calibration

• Printer

Printer selection

- Protocol on/off

- Input of user specifications

- Printing date and time

- Header setting

• Data interface

Baud rate setting

- Handshake selection

• Device settings refer to 6

5.1.1 Function selection

........................................................................................................................................

In the D19C you can protect the settings by means of a password (optional feature which is

not included in all instruments).

........................................................................................................................................

If the settings are protected, you will be able to enter the menu ‘settings’ only by using a

password. Please don’t lose this password! Otherwise please contact your GretagMacbeth

representative.

........................................................................................................................................

To switch on the setting protection refer to settings k device settings k setting

protection.

........................................................................................................................................