Technical data

Settings
............................
5.5.5 Measurement parameters for dot area
5.5.5.1 Setting for dot area calculation according to Murray-Davies
5.5.5.2 Setting for dot area calculation according to Yule-Nielsen
5.5.6 Measurement parameters for printing plate
5.5.6.1 Setting of the Yule-Nielsen coefficient for measuring printing plates
5.6 Calibration
5.6.1 GretagMacbeth calibration cards
5.6.2 Calibration with paper white base
5.6.2.1 Reject data
5.6.3 Check calibration with paper white base
5.6.4 Calibration with absolute white base
5.6.4.1 Reject data
5.6.5 Check calibration with absolute white base
5.7 Printer
5.7.1 Printer or PC
5.7.2 Printer protocol
5.7.3 Printing date and time
5.7.4 Header printout
5.7.4.1 Header settings
5.7.4.1.1 Printing date and time
5.7.4.1.2 Printing reference values
5.7.4.1.3 User specifications
5.8 Data interface
5.8.1 Baud rate setting
5.8.2 Handshake setting