Technical data

1
2
3
4
5
6
7
8
9
10
11
5 Settings
5.1 Overview
5.1.1 Function selection
5.1.1.1 Function selection if the settings are not protected
5.1.1.2 Function selection if the settings are protected
5.2 Color
5.2.1 Manual color selection
5.2.2 Automatic color recognition
5.3 Jobs
5.3.1 Job definition
5.3.1.1 Accept data
5.3.1.2 Setting of default values
5.3.1.3 Reject data
5.3.2 Job selection
5.4 References
5.4.1 Reference entry by measurement
5.4.1.1 Accept data
5.4.1.2 Reject data
5.4.2 Assignment of measured values to reference values
5.4.2.1 Assignment of measured values to a specific reference
5.4.2.2 Automatic assignment of measured values to references
5.4.3 Entry or correction of reference and tolerance values
5.4.3.1 Accept data
5.4.3.2 Reject data
5.4.4 Job selection
5.4.5 Reference entry
5.4.5.1 Accept data
5.4.5.2 Reject data
5.5 Measurement parameters
5.5.1 Overview
5.5.1.1 Function selection
5.5.2 Measurement parameters for white base
5.5.2.1 Setting of paper white base
5.5.2.2 Setting of absolute white base
5.5.3 Measurement parameters for dot gain
5.5.3.1 Entry of halftone reference values
5.5.3.1.1 Accept data
5.5.3.1.2 Reject data
5.5.4 Measurement parameters for print characteristic
5.5.4.1 Entry of scale graduation
5.5.4.2 Numerical or graphic representation of print characteristic