X-Rite D19C Standard > D19C Full Upgrade : Technical data : Page 53

Densitometric functions

............................

4

4.15

4.15 Auto. function 2

........................................................................................................................................

Auto. function 2 includes the automatic color recognition (Automatic) and the automatic

function recognition for density, dot gain and trapping. The display indicates the printing

sequence with the density values of the standard colors and the corresponding measured

values for density, dot gain or trapping at the same time.

........................................................................................................................................

Select paper white or absolute white base under Settings k Measurement parameters k

White base.

........................................................................................................................................

Switching over between Auto. function 1 to Auto. function 2 is possible.

........................................................................................................................................

Procedure:

• Select the menu line Auto. function 2 by turning the <Control ball>.

• Activate the selected function by pressing the <Measurement key>.

• Select the menu line Measure paper white by turning the <Control ball>.

• Position the measuring aperture on the paper white and initiate a measurement by pressing the

<Measurement key>.

• The display White measurement done is shown for about 1 second.