Technical data

Densitometric functions
............................
4.7 – 4.7.1
• After pressing the <Measurement key>, the graphic mode is shown on the display.
• Pressing the <Measurement key> again will switch the display to the numerical mode.
• Select the menu line Return by turning the <Control ball> and press the <Measurement key> to
return to the main menu.
4.7.1 Print out of the print characteristic
........................................................................................................................................
• Configure and connect your printer to the D190 remission densitometer.
• Configure data interface under Settings
k Data interface.
• Select the D190 printer protocol under Settings k Printer k Printer protocol.
• Return to the main menu.
........................................................................................................................................
Procedure:
• Select the Print symbol by turning the <Control ball>.
• Activate the printout of the print characteristic by pressing the <Measurement key>.