X-Rite D19C Standard > D19C Full Upgrade : Technical data : Page 38

Densitometric functions

............................

4.5.2

4.5.2 Procedure with preset reference values

........................................................................................................................................

Define the names of your jobs and the number of references per job under Settings k Jobs.

........................................................................................................................................

Select the desired job under All density diff k Reference Input k Job or Settings k Jobs

k Select job.

........................................................................................................................................

Enter or measure the reference values and enter the tolerances under All density diff k

Reference Input.

........................................................................................................................................

• Select the menu line All density diff by turning the <Control ball>.

• Activate the selected function by pressing the <Measurement key>.

• Select the menu line Measure paper white by turning the <Control ball>.

• Position the measuring aperture on the paper white and initiate a measurement by pressing the

<Measurement key>.

• The display White measurement done is shown for about 1 second.

• Position the measuring aperture on the desired color sample and initiate a measurement by pressing

the <Measurement key>.

• The measured density differences of the respective color is shown on the display.

• Select the menu line Return by turning the <Control ball> and press the <Measurement key> to

return to the main menu.