Technical data

Densitometric functions

............................

4.5.1

• Select the menu line Accept data by turning the <Control ball>.

• Accept the reference and tolerance values by pressing the <Measurement key>.

• Select the menu line Measure paper white by turning the <Control ball>.

• Position the measuring aperture on the paper white and initiate a measurement by pressing the

<Measurement key>.

• The display White measurement done is shown for about 1 second.

• Position the measuring aperture on the color sample and initiate a measurement by pressing the

<Measurement key>.

• The measured density differences ∆D appear on the display.

If one or more preset tolerance values for the density difference are exceeded, the note Out of

tolerance will additionally be shown.

• Select the menu line Return by turning the <Control ball> and actuate the <Measurement key> to

return to main menu.