Technical data

Densitometric functions
............................
4.5.1
• Select the menu line Measure paper white by turning the <Control ball>.
• Position the measuring aperture on the paper white and initiate a measurement by pressing the
<Measurement key>.
• The display White measurement done is shown for about 1 second.
• Select the menu line Measure ‘color’ by turning the <Control ball>.
• Position the measuring aperture on the color sample and initiate the measurements by pressing the
<Measurement key>.
• The density values of the measured color are shown on the display.
• Select the menu line where you want to change the name ore the value of the reference.
• Activate the selection by pressing the <Measurement key>.
• Change the values.
• Activate the changes by pressing the <Measurement key>.
• Repeat all this steps until all values of the reference are corrected.
• Repeat all this steps until all colors are defined as references.