X-Rite D19C Standard > D19C Full Upgrade : Technical data : Page 34

Densitometric functions

............................

4.4.2

4.4.2 Procedure with preset reference values

........................................................................................................................................

Define the names of your jobs and the number of references per job under Settings k Jobs.

........................................................................................................................................

Enter or measure the reference values and enter the tolerances under Settings k

References k Reference Input.

........................................................................................................................................

Select the desired job under Settings k Jobs k Select job or Settings k References k

Reference k Job .

........................................................................................................................................

• Select the menu line Density difference by turning the <Control ball>.

• Activate the selected function by pressing the <Measurement key>.

• Select the menu line Measure paper white by turning the <Control ball>.

• Position the measuring aperture on the paper white and initiate a measurement by pressing the

<Measurement key>.

• The display White measurement done is shown for about 1 second.

• Position the measuring aperture on the desired color sample and initiate a measurement by pressing

the <Measurement key>.

• The measured density difference of the respective color is shown on the display.

• Select the menu line Return by turning the <Control ball> and press the <Measurement key> to

return to the main menu.