Technical data

Densitometric functions
............................
4.3
4.3 All densities
The function ‘All densities’ will be used if you are interested in all absorbtions of a printed color, not
only the main absorbtion (e.g. for measuring the gray-balance).
........................................................................................................................................
Select paper white or absolute white base under Settings k Measurement parameters k
white base.
........................................................................................................................................
Procedure:
• Select the menu line All densities by turning the <Control ball>.
• Activate the selected function by pressing the <Measurement key>.
• Select the menu line Measure paper white by turning the <Control ball>.
• Position the measuring aperture on the paper white and initiate a measurement by pressing the
<Measurement key>.
• The display White measurement done is shown for about 1 second.
• Position the measuring aperture on the color sample and initiate a measurement by pressing the
<Measurement key>.
• The measured density values are shown on the display.
• Select the menu line Return by turning the <Control ball> and actuate the <Measurement key> to
return to the main menu.