Technical data

Densitometric functions
............................
4.1.3.1 – 4.1.4
4.1.3.2 Automatic color selection in a densitometric function
Procedure:
• Select the menu line Color by turning the <Control ball> and confirm the selection by pressing the
<Measurement key>.
• Select the automatic color selection.
• Activate the automatic color selection by pressing the <Measurement key>.
4.1.4 Printout of measuring results
Procedure:
• Configure your printer interface with the corresponding operating manual.
........................................................................................................................................
• Baudrate setting
• Handshake setting
• Data format
........................................................................................................................................
• Connect the D190 with your printer.
........................................................................................................................................
• Chapter 9.12 Connection to printer PC or Mac
........................................................................................................................................
• Configure the D190 interface under Settings k Data Interface.
........................................................................................................................................
• Chapter 5.8 Baudrate setting
• Chapter 5.8 Handshake setting
........................................................................................................................................
• Select the D190 printer protocol under Settings k Printer k Printer protocol.
........................................................................................................................................
• Chapter 5.7 Select printer type
• Chapter 5.7 Select D190 printer protocol
• Chapter 5.7 Select date and time printing
........................................................................................................................................
• The measuring result will be printed after each measurement.