Technical data

Function elements
............................
2.6.2
2.6.2 Switching off the electronic safeguard
........................................................................................................................................
After turning the <Control ball> or after actuating the <Measurement key> with the electronic
safeguard switched on, a code number for the release of the electronic safeguard will be
displayed.
........................................................................................................................................
Procedure:
• Press the <Measurement key> for approx. 3 seconds to delete any entries that may accidentally
have occurred through vibrations during transport.
• Briefly press the <Measurement key>.
• A field for the entry of the code number appears on the display.
• Use the <Control ball> to select the first figure of the code number.
• Press the <Measurement key> to enter the first figure.
• Use the <Control ball> to select the second figure of the code number.
• Press the <Measurement key> to enter the second figure.
• Use the <Control ball> to select the third figure of the code number.
• Press the <Measurement key> to enter the third figure.
• Select the entry line OK by turning the <Control ball>.
• Press the <Measurement key> repeatedly to return the program to the main menu.
........................................................................................................................................
To delete incorrectly entered code numbers, press the <Measurement key> for approx. 3
seconds. To delete a figure, select the entry line
o and press the <Measurement key>.
........................................................................................................................................