Technical data

Device settings
............................
6.9.1.1 – 6.9.1.2
Dark pulse number
12000 ... 24000 typ.18000
Color Measuring range Channel sensitivities
B, C, M, Y 0.00 D ... 2.50 D 0.00 ... 0.70 typ. 0.30
Y (NB) 0.00 D ... 2.20 D 0.00 ... 1.00 typ. 0.60
6.9.1.1 Switching the lamp on/off
Procedure:
• Select the menu line Lamp by turning the <Control ball>.
• Press the <Measurement key>; the display shows <off>.
• Switch the lamp on or off by turning the <Control ball>.
• Press the <Measurement key>; the display shows Lamp <off> in reverse video.
• Select the menu line Return by turning the <Control ball> and press the <Measurement key>
several times to return to the main menu.
6.9.1.2 Channel sensitivities and dark pulse number
Procedure:
• Select the menu line Sample by turning the <Control ball>.
• Position the measuring aperture on the white field of the calibration card and initiate a measurement
by pressing the <Measurement key>.
• The display shows the channel sensitivity values of the individual colors and the dark pulse number
as well as the number of measurements performed up to this time.
• Select the menu line Return by turning the <Control ball> and press the <Measurement key>
several times to return to the main menu.
• The Channel sensitivities and Dark pulse number should be in the range: