Technical data

Device settings
............................
6.8 – 6.8.2
6.8 Date and time
All D19C and all D196 densitometers manufactured after 1.1.1995 have a built-in-clock. These
instruments are able to print out date and time of the measurements.
You can set and adjust the clock and you can choose the time format.
6.8.1 The menu Date and time
Procedure:
• Select the menu Settings
k Device settings.
• Select the menu line Date and time by turning the <Control ball> and confirm the selection by
pressing the <Measurement key>.
6.8.2 Select the format of date and time
Procedure:
• Select the menu Settings
k Device settingsk Date and time (refer to 6.8.1).
• Select the menu line Format by turning the <Control ball> and confirm the selection by pressing the
<Measurement key>.
• Select European for the format
• date: dd.mm.jjjj
• time: hh:mm:ss
• Select American for the format
• date: mm/dd/jjjj
• time: hh:mm:ss am/pm
• Confirm the selection by pressing the <Measurement key>.