Technical data

Device settings
............................
6.5.2
6.5.2 User-defined functions
........................................................................................................................................
The user can define which functions are selectable in the main menu of the D190.
........................................................................................................................................
Procedure:
• Select the menu line User-defined by turning the <Control ball> and confirm the selection by
pressing the <Measurement key>.
• Select the desired functions by turning the <Control ball>.
• Switch the selected functions on/off by pressing the <Measurement key>.
• Select the menu line Accept data by turning the <Control ball> and terminate the entry by pressing
the <Measurement key>.
• Select the menu line Return by turning the <Control ball> and press the <Measurement key>
several times to return to the main menu.
• Or select the menu line Reject data by turning the <Control ball> and confirm the action by pressing
the <Measurement key>.
The new data will not be stored; previously stored data will be retained.
• Only the functions you have selected are shown on the display.