Instruction manual

C-1
A P P E N D I X C
Term Abbreviations
ALF Automatic Line Feed
ALL Strip is one pass and may be read in either direction (strip measurement mode)
AXMT Automatic Transmit
bal Printer Balance
baud Varies unit of data transmission speed.
BLK Black patch must be read first (strip measurement mode)
cal Calibration
c:I/O#1 Copal, I/O #1
c:I/O#2 Copal, I/O #2
cnfg Configuration
COMP Compact
CTS Clear to Send
CYN Cyan patch must be read first (strip measurement mode)
def Default
del Delete
DEL Delay (in configuration)
DPT Decimal Point
f:TECOM Fuji, Tecom System
HD High Density patch must be read first (strip measurement mode)
k:C.A.P. Kodak, Create a Print
k:SYS
2
5
→
7
5
Kodak, Systems 25 through 75
k:TNetA Kodak, Technet A
k:TNetXT Kodak, Technet XT
LANG Language
MIN Minimum Density patch must be read first (strip measurement mode)
NRM Normal patch must be read first (strip measurement mode)
NUO 1-Pass Normal/Under/Over in 1 pass
pap Paper
PIN5 Pin5 of RS232 port can be set to Off, Busy, or CTS
p1 through p3 Page #1 through Page #3
p2a through p2d Page #2a through Page #2d